Commercial Gas Products

Cyclone™ MXi

The full line of A. O. Smith CycloneTM MXi condensing water heaters has been designed to provide years of dependable service and feature industry leading technology. Models are available with inputs of 120,000 to 500,000 BTU/h and all deliver thermal efficiencies of 95% and higher. The unique helical heat exchanger maximizes heat transfer, while the powered anode rod helps prolong the life of the tank.

Cyclone™ Xi

The CycloneTM Xi is a light-duty, power direct vent, fully condensing commercial gas water heater with a helical heat exchanger that delivers an outstanding hot water performance and achieves a 96% thermal efficiency.

Cyclone™ XL

NOW AVAILABLE!


Designed to provide years of dependable service, the CycloneTM XL condensing water heater features industry-leading technology. The primary and secondary stainless steel heat exchangers provide optimal service life, while maximizing heat transfer. Two models to choose from 750,000 or 1,000,000 BTU/h, with both delivering thermal efficiencies of 97%.

Cyclone™ LV

The full line of A. O. Smith CycloneTM LV condensing water heaters has been designed to provide years of dependable service and feature industry leading technology. Models are available from 150,000 to 499,900 BTU/h and deliver thermal efficiencies up to 96%. The unique helical heat exchanger maximizes heat transfer, while the powered anode rod helps prolong the life of the tank.

Cyclone™ HE

The CycloneTM HE is a light-duty, power vent, fully condensing commercial gas water heater with an internal helical heat exchanger, similar to the design of A. O. Smith’s industry-leading CycloneTM models. This helical heat exchanger helps CycloneTM HE achieve 94% thermal efficiency and deliver outstanding hot water output.

Polaris™ PC

Polaris™ has a high grade 444 stainless steel tank with brass connections for years of dependable, trouble-free service – no anode required. A submerged combustion chamber with spiral flue provides up to 96% thermal efficiency and ultra-low standby heat loss of approximately 1%.

BMS

BACnet and Modbus Interface ETH-1000/MIRIUS



Connect your A. O. Smith water heater to your building management system using the new millennium control from ICC (Industrial Control Communications Inc.).

The Building Management System gateway is used to link A. O. Smith water heaters into the existing BACnet or Modbus system. Use the ICC control to enable and disable water heaters, change the temperature set points and differentials – all from the BMS control station.

Let us do the searching for you.

Designed to help you specify for any application, plus a Payback Calculator.

Product Training

Become a Certified A. O. Smith Pro today!